When a building makes people uncomfortable or sick, you need to know what is actually in the air and why. We inspect, measure and sample your indoor environment, run the samples through an accredited lab, and hand you a clear report with the findings and what to do about them.
Most indoor-air problems are invisible. Occupants report headaches, stuffiness, odors or worsening allergies, but without data it is guesswork — and guesswork leads to spending money on the wrong fix. The EPA has long noted that indoor air can be significantly more polluted than outdoor air, and OSHA estimates a large share of commercial buildings have below-standard indoor air quality.
An indoor air quality inspection turns symptoms into numbers. We measure the things that actually drive comfort and health — airborne mold and particulates, carbon dioxide as a ventilation indicator, temperature and humidity, and VOCs — and we compare ventilation against ASHRAE 62.1, the standard for acceptable indoor air quality. The result is a clear picture of what is wrong and where.
As the HVAC and indoor-air-quality specialists, IAQ Restoration does more than hand you a lab sheet. We connect the readings back to the building systems that cause them — the ductwork, coils, ventilation and moisture sources — so the report tells you not just what is in the air, but how to fix it.
A tenant complaint, a failed occupancy, a post-renovation smell, a suspected mold problem — an IAQ inspection gives you defensible data and a clear next step, instead of finger-pointing.
A full picture of the indoor environment — measured on site and confirmed by an accredited laboratory.
Air and surface samples identify mold type and concentration versus outdoor baseline — the data a mold problem needs.
We measure fine and coarse particulate that drives irritation, dust complaints and filtration problems.
Carbon-dioxide readings reveal whether the space is actually ventilated to ASHRAE 62.1 or starved of fresh air.
Volatile organic compounds from finishes, cleaning products and processes are measured and sourced.
Comfort and moisture are logged — high humidity is the hidden driver of mold and dust-mite complaints.
We inspect ventilation, filtration and the HVAC that moves the air, tying readings back to their cause.
Headaches, stuffiness, odors or allergy flare-ups — testing finds the cause instead of guessing at it.
Post-loss and post-remediation clearance testing confirms the problem is actually resolved, not just hidden.
Verify ventilation to ASHRAE 62.1 for tenants, occupancy, LEED/WELL goals or a lease requirement.
Independent, documented air-quality data for acquisitions, disputes, insurance and peace of mind.
A structured assessment from intake to a report you can act on.
We learn the complaints, history and problem areas, and define exactly what to test and where.
A visual survey of the space and HVAC identifies moisture, contamination and ventilation issues.
Calibrated instruments log CO₂, particulates, VOCs, temperature and humidity across the building.
We collect air and surface samples where warranted and submit them to an accredited laboratory.
The accredited lab identifies and quantifies mold and other contaminants against outdoor baselines.
You receive a clear report: findings, benchmarks, root cause, and the specific steps to fix it.
Samples are analyzed by an accredited laboratory, so the numbers hold up for tenants, insurers and courts.
As HVAC and IAQ specialists, we tie every reading back to the ductwork, coils, ventilation or moisture behind it.
If the report calls for cleaning, decontamination or remediation, the team that found it can also resolve it.
Any of these is a reason to get data before you spend on a fix.
An inspection often leads to a fix. Explore the connected services — or the commercial air duct cleaning pillar.
A typical inspection measures airborne mold and spores, fine and coarse particulates (PM2.5/PM10), carbon dioxide as a ventilation indicator, VOCs, and temperature and humidity, alongside a visual inspection of the space and HVAC. We benchmark ventilation against ASHRAE 62.1 and compare mold against outdoor baselines using an accredited lab.
Yes. We collect air and surface samples and submit them to an accredited laboratory that identifies and quantifies mold against an outdoor baseline. We also perform post-remediation clearance testing to confirm a mold problem is actually resolved.
Yes. Samples are analyzed by an accredited laboratory (for example, AIHA-LAP accredited), so the results are defensible for tenants, occupancy requirements, insurance and disputes — not just an on-the-spot meter reading.
Yes. Because we are HVAC and indoor-air-quality specialists, the same team can perform the duct cleaning, coil and component cleaning, decontamination or restoration the report calls for — so you are not left with a diagnosis and no cure. Call 800-883-6040.
Accredited-lab indoor air quality inspection and testing, benchmarked to ASHRAE 62.1 and delivered as a clear, actionable report. Book an assessment — we’ll scope it, free.
📞 Call 800-883-6040 Request a Quote Online